Classic Jorgensen adjustable handscrew
Every Jorgensen handscrew we make is crafted to ensure maximum strength and durability. Seasoned, straight-grain hard maple wood jaws marry with cold-drawn steel spindles and nuts with special double-lead threads. Together they create a handscrew clamp that holds tightly over broad areas, providing greater reach and a wider distribution of pressure than other clamps. The angle between the jaws can be adjusted to fit the work, allowing them to hold odd shapes easily. Our handscrew clamps are easy to apply and remove quickly, and provide protection against marring of finished surfaces. Traditional seasoned hardwood handles are designed for comfort now and for years to come.
|Product Number||Jaw Length||Max Opening||Reach|
|3/0||6 in.||3 in.||2 3/4 in.|
|0||8 in.||4 1/2 in.||3 7/8 in.|
|1||10 in.||6 in.||5 in.|
|2||12 in.||8 in.||6 in.|
Pony cabinet claw
Complete your cabinetry projects in a fraction of the time with Pony cabinet claws. This unique and patented tool combines the various steps of face-frame cabinet installation into one easy process. The high-quality aluminum claws and alignment plate have protective rubber pads to cushion and protect cabinetry.
|8510||Pony cabinet claw (2 pack)|
|8511||Pony cabinet claw|
Pony three-way edging clamp
When you need to repair molding, decorative trim, countertop edging, or veneer strips, trust the Pony three-way edging clamp. This cast-iron, orange-powder-coated clamp provides a convenient, practical method for applying right-angle pressure to the edge or side of any workpiece.
|Product Number||Max Opening||Clamping Force||Depth Of Throat|
|3325||2 1/4 in.||800 lb.||2 1/2 in.|
Pony hold-down clamp
Pony hold-down clamps offer the advantage of benchtop and machine-table “surface” clamping. They are designed to rotate a full 360 degrees around the holding bolt and can be used on any wood or metal surface. Our heavy-duty hold-down clamp is designed to be mounted anywhere a T-slot or machine bolt can be installed, and its unique square-head screw can be tightened with a wrench for a secure hold.
Pony bench hold-down clamp
The Pony bench hold-down clamp is a versatile, easy-to-use clamp made for holding work in place on benchtops, and it’s made of solid iron with a black, baked-enamel finish. Simply tap it into a predrilled hole in your benchtop.
|Product Number||Length||Reach||Predrilled Hole|
|1708||8 in.||4 in.||11/16 in.|
|1716||16 in.||8 in.||13/16 in.|
Pony press screws
Pony heavy-duty press screws are ideal for making veneering frames and are especially useful for deep-reach surface clamping. The large, removable cast-iron swivels make installation a breeze, and the threaded bushings fit easily into a one-inch hole. 11/16-inch diameter, cold-drawn steel screws with special, smoothly cut acme threads provide a tight hold.
|Product Number||Length||Screw Diameter||Swivel Face Size||Handle|
|6709||9 in.||11/16 in.||1 3/8 x 1 5/8 in.||Crank|
|6712||12 in.||11/16 in.||1 3/8 x 1 5/8 in.||Crank|
|6718||18 in.||11/16 in.||1 3/8 x 1 5/8 in.||Crank|